It is an efficient catalyst for removing mercaptan in light oil. Gasoline refined from sour crude oil contains higher mercaptan sulfur content.

mercaptan wrapped in fuel is malodorous and corrosive, which reduces the lead content of gas. except, mercaptan is also an oxidation initiator, which can promote the oxidation and condensation of risky components in fuel to gel, resulting in terrible garage balance of gasoline. cobalt phthalocyanine sulfonate is an powerful catalyst for disposing of mercaptan sulfur from heavy oil, and it has the identical effect. whilst in use, dissolve the catalyst in 10% alkali solution, heat it slightly for a time frame, and stir to dissolve it before use.

Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture. Content: ≥ 85% Melting point: 98-102 ° C Dry loss: ≤0.2%

the crystal form of citric acid is exclusive due to distinctive crystallization conditions. it's miles barely weathered in dry air and hygroscopic in humid air. when heated, citric acid may be differentiated into diverse merchandise, that could react with acid, alkali, glycerin, and so on.

Only a small part of ammonia molecules react with water to form ammonia monohydrate, which is a weak base that only exists in ammonia.

Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935 The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.

Appearance: watery bright liquid with pleasant ketone-like fragrance. Main uses: Used as a solvent for spray paint, nitrocellulose, some fiber ethers, camphor, grease, natural and synthetic rubber. Precautions for storage and transportation: Store in a cool and ventilated warehouse. Keep away from kindling and heat sources. The warehouse temperature should not exceed 30℃. Avoid direct sunlight. Keep the container sealed. It should be stored separately from oxidant. Lighting, ventilation and other equipment in the storage room should be explosion-proof.

Appearance: watery bright liquid with pleasant ketone-like fragrance.Main uses: Used as a solvent for spray paint, nitrocellulose, some fiber ethers, camphor, grease, natural and synthetic rubber.Precautions for storage and transportation: Store in a cool and ventilated warehouse. Keep away from kindling and heat sources. The warehouse temperature should not exceed 30℃. Avoid direct sunlight. Keep the container sealed. It should be stored separately from oxidant. Lighting, ventilation and other equipment in the storage room should be explosion-proof.

Glycerol, also called glycerol, with the chemical formula c3h8o3, is colorless, odorless, sweet, with a clean and viscous liquid appearance. it's miles an organic substance that may take in moisture from the air, as well as hydrogen sulfide, hydrogen cyanide and sulfur dioxide. insoluble in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oils, it's miles the skeleton factor of triglyceride molecules.

Physical nature Colorless concierge fluids have a fierce scent. Insoluble in water, dissolved in ethanol and ether. Benzyl alcohol, paf alcohol, 2-chloroethanol, ethylene glycol, furfural, dimethylformamide and acetonitrile were dissolved at room temperature. No corrosive metal.

Appearance and properties: colorless liquid, almost odorless Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃ Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935

Hypromellose (Hypromellose), also called hypromellose, is one of the non-ionic cellulose mixed ethers.

Hydrogen Peroxide Solution is an aqueous solution of hydrogen peroxide.

Physical and chemical properties: (1) Melting point (° C): - 2 (2) Boiling point (° C): 158 (no water) (3) Relative density (water = 1): 1.46 (4) Relative density (air = 1): no material (5) Solubility: dissolved in water, alcohol, ether, insoluble in benzene, petroleum ether (6) Stability: unstable, protected from light (7) Preventing the conditions of touch (taboo): strong acid, strong alkali, acyl chloride, alcohol, amine, flammable or combustible materials.

A substance that can reduce the surface tension of water, solution, suspension, etc., prevent the formation of foam, or reduce or eliminate the original foam. [1]

Miscible with ether, diethylene glycol, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene and olive oil. It can react with hydroxyl-containing compounds, water, amines and compounds with active hydrogen atoms to generate carbamate, urea, semicarbazide, etc. Toluene is nitrated with mixed acid to obtain 2,4- and 2,6-dinitrotoluene, and then hydrogenated and reduced in the presence of nickel catalyst to obtain 2,4- and 2,6-diaminotoluene, which is then reacted with light in chlorobenzene solution. produced by gas reaction.

Industrial ammonia is an aqueous solution containing 25% to 28% ammonia. Only a small part of ammonia molecules react with water to form ammonia monohydrate, which is a weak base that only exists in ammonia.

Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.

citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.

its density is 1.542g/cm3, its melting point is 153-159℃, and water and carbon dioxide are differentiated and launched above a hundred seventy five℃. citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.

Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.