Toluene Diisocyanate-manufacture,factory,supplier from China

(Total 24 Products for Toluene Diisocyanate)
The toluene diisocyanate has 2,4-toluene diisocyanates and 2,6-toluene diisocyanate (TDI).
  Contact Now
There are two isomers of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate (TDI). According to the content of the two isomers, there are three standard products in the industry: (1) TDI-65 contains 2,4-TDI65%, 2,6-TDI35%; (2) TDI-80 contains 2,4- TDI80%, 2,6-TDI20%, more common; (3) TDI-100 contains 2,4-TDI100%. Carbon dioxide occurs with water effect. Easy to work with compounds containing active hydrogen atoms. Linear polyurethane or polyurethane resin with diol effect.
  Contact Now
Miscible with ether, diethylene glycol, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene and olive oil. It can react with hydroxyl-containing compounds, water, amines and compounds with active hydrogen atoms to generate carbamate, urea, semicarbazide, etc. Toluene is nitrated with mixed acid to obtain 2,4- and 2,6-dinitrotoluene, and then hydrogenated and reduced in the presence of nickel catalyst to obtain 2,4- and 2,6-diaminotoluene, which is then reacted with light in chlorobenzene solution. produced by gas reaction.
  Contact Now
Dibenylmethane diisocyanate, referred to as "MDI", is an organic substance, a chemical formula C15H10N2O2.
  Contact Now
M-xylene is an organic compound with a molecular formula C8H10, a molecular weight of 106, a colorless concussion liquid, a odor like toluene.
  Contact Now
1.4, 4 '- methylene bis (2-chlorocene) The molecular weight is 267.15, the molecular formula is C13H12N2 CL2
  Contact Now
From the perspective of physics, the methods to eliminate foam mainly include placing baffles or filters, mechanical stirring, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure and decompression, high-frequency vibration, instantaneous discharge and ultrasonic (acoustic) Liquid control), etc., these methods promote the gas permeation rate at both ends of the liquid film and the drainage of the bubble film to varying degrees, so that the stability factor of the foam is smaller than the attenuation factor, and the number of foams is gradually reduced.
  Contact Now
It is a solvent for a variety of coatings and a raw material for preparing dibutyl phthalate, a plasticizer. It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether,
  Contact Now
It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether, as an extractant for organic synthesis intermediates and biochemical drugs, and in the manufacture of surfactants.
  Contact Now
Ethylene glycol ether (2-ethoxyethanol) is an organic compound with a molecular formula of C4H10O2 and a molecular weight of 90.12. It is a colorless and transparent liquid.
  Contact Now
Appearance and properties: colorless liquid, almost odorless Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃ Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935
  Contact Now
Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.
  Contact Now
Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose.
  Contact Now
It is a solvent for a variety of coatings and a raw material for preparing dibutyl phthalate, a plasticizer. It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether, as an extractant for organic synthesis intermediates and biochemical drugs, and in the manufacture of surfactants.N-butanol is a colorless, transparent and alcoholic liquid.
  Contact Now
Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935 The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.
  Contact Now
Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.
  Contact Now
Physical nature Colorless concierge fluids have a fierce scent. Insoluble in water, dissolved in ethanol and ether. Benzyl alcohol, paf alcohol, 2-chloroethanol, ethylene glycol, furfural, dimethylformamide and acetonitrile were dissolved at room temperature. No corrosive metal.
  Contact Now
White oblique crystals, industrial products are white or light gray lumps or rods. Easily soluble in water, emits a lot of heat of dissolution when dissolved, soluble in ethanol, slightly soluble in ether. It is deliquescent and has strong water absorption. Potassium hydroxide is strongly alkaline and corrosive, and its properties are similar to sodium hydroxide, which can cause burns. It can absorb water and dissolve in the air, and absorb carbon dioxide to gradually become potassium carbonate. The pH of the 0.1 mol/L solution is 13.5.
  Contact Now
Methacrylic acid is colorless crystal or transparent liquid with pungent odor. Soluble in hot water, soluble in most organic solvents such as ethanol and ether. Easily polymerized into water-soluble polymers. Combustible, there is a danger of burning in case of high heat and open flame, and it can produce toxic gas when heated.
  Contact Now

Relate News

TDI is the abbreviation of toluene diisocyanate. TDI is a polycyanate widely used in industrial production. It is a polyurethane material and an important basic material. Mainly used to make flexible polyurethane foam, polyurethane elastomer, coatings, adhesives, etc.
Benzene and its homologues toluene and xylene are mainly obtained from coal tar fractionation and cracking petroleum. The three are colorless, transparent and aromatic liquids with strong volatility.
TDI (toluene diisocyanate) is one of the commonly used polyisocyanate, and polyisocyanate is an important base material of polyurethane (PU). The TDI commonly used in the polyurethane industry is a mixture of 2,4-TDI and 2,6-TDI isomers, including three commonly used grades.
Toluene diisocyanate is combustible in case of open flame and high heat. It can react with oxidants. Reacts violently with amines, alcohols, alkalis and warm water, and can cause combustion or explosion.
Firefighters must wear gas masks and full-body fire fighting clothes, and put out the fire in the upwind direction. Spray water to keep the fire container cool until the end of the fire extinguishing.
Hydroxypropyl toluene cellulose is a commonly used building material additive, which is widely used in industry and has a wide variety of types.
Meta-xylene is an organic compound with a molecular formula of C8H10 and a molecular weight of 106. It is a colorless and transparent liquid with an odor similar to toluene. It is insoluble in water, but miscible in most organic solvents such as ethanol, ether and chloroform. Used as solvent, medicine, dye intermediate, perfume, etc.
Acrylic paint is a one-component self-drying weather-resistant and anticorrosive paint made by advanced technology based on traditional acrylic resin and added with long-life chlorosulfonated polyethylene rubber, weather-resistant pigments and fillers, and weather-resistant additives recognized by China and foreign countries.
According to the data, the domestic xylene market price trend has fallen sharply.The Pengzhou Petrochemical Plant, Urumqi Petrochemical Plant, and Fuhai Chuang Aromatics Plant each run one line. Hengli Petrochemical’s PX plant is overhauled, and other plants are temporarily The operation is stable.
Bubbles play an important role in industrial production. In the production of foam due to various reasons, use a defoamer to defoam.